Narzędzia użytkownika

Narzędzia witryny


cisco-eigrp

CISCO - EIGRP

Router(config)#hostname kamilm
kamilm(config)#interface fastEthernet 0/0
kamilm(config-if)#ip address 10.1.1.1 255.255.255.0
kamilm(config-if)#no shutdown
Jun 18 10:52:26.786: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
Jun 18 10:52:27.787: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
kamilm(config-if)#exit
kamilm(config)#interface serial 0/0
kamilm(config-if)#ip address 10.1.2.1 255.255.255.0
kamilm(config-if)#no shutdown
kamilm(config-if)#
Jun 18 10:55:07.217: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up
Jun 18 10:55:08.218: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
kamilm(config-if)#exit
kamilm(config)#
Jun 18 10:58:12.080: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down
Jun 18 10:58:13.081: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to down
kamil#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
kamil(config)#router eigrp 100
kamil(config-router)#network 10.1.1.0
kamil(config-router)#network 10.1.2.0
Jun 18 11:12:45.099: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 10.1.2.2 (Serial0/0) is up: new adjacency
kamil(config-router)#
cisco-eigrp.txt · ostatnio zmienione: 2018/07/16 11:47 (edycja zewnętrzna)