Narzędzia użytkownika

Narzędzia witryny


cisco-eigrp

Różnice

Różnice między wybraną wersją a wersją aktualną.

Odnośnik do tego porównania

cisco-eigrp [2018/07/16 11:47] (aktualna)
Linia 1: Linia 1:
 +===== CISCO - EIGRP =====
  
 +<​file>​
 +Router(config)#​hostname kamilm
 +kamilm(config)#​interface fastEthernet 0/0
 +kamilm(config-if)#​ip address 10.1.1.1 255.255.255.0
 +kamilm(config-if)#​no shutdown
 +Jun 18 10:​52:​26.786:​ %LINK-3-UPDOWN:​ Interface FastEthernet0/​0,​ changed state to up
 +Jun 18 10:​52:​27.787:​ %LINEPROTO-5-UPDOWN:​ Line protocol on Interface FastEthernet0/​0,​ changed state to up
 +kamilm(config-if)#​exit
 +kamilm(config)#​interface serial 0/0
 +kamilm(config-if)#​ip address 10.1.2.1 255.255.255.0
 +kamilm(config-if)#​no shutdown
 +kamilm(config-if)#​
 +Jun 18 10:​55:​07.217:​ %LINK-3-UPDOWN:​ Interface Serial0/0, changed state to up
 +Jun 18 10:​55:​08.218:​ %LINEPROTO-5-UPDOWN:​ Line protocol on Interface Serial0/0, changed state to up
 +kamilm(config-if)#​exit
 +kamilm(config)#​
 +Jun 18 10:​58:​12.080:​ %LINK-3-UPDOWN:​ Interface Serial0/0, changed state to down
 +Jun 18 10:​58:​13.081:​ %LINEPROTO-5-UPDOWN:​ Line protocol on Interface Serial0/0, changed state to down
 +kamil#​configure terminal
 +Enter configuration commands, one per line.  End with CNTL/Z.
 +kamil(config)#​router eigrp 100
 +kamil(config-router)#​network 10.1.1.0
 +kamil(config-router)#​network 10.1.2.0
 +Jun 18 11:​12:​45.099:​ %DUAL-5-NBRCHANGE:​ IP-EIGRP(0) 100: Neighbor 10.1.2.2 (Serial0/0) is up: new adjacency
 +kamil(config-router)#​
 +</​file>​
cisco-eigrp.txt · ostatnio zmienione: 2018/07/16 11:47 (edycja zewnętrzna)