cisco-ospf

no way to compare when less than two revisions

Różnice

Różnice między wybraną wersją a wersją aktualną.

@@ Linia 1: / Linia 1: @@
+===== CISCO - OSPF =====
+<file>
+Router#configure terminal
+Router(config)#interface fa 0/0
+Router(config-if)#ip address 10.1.5.1 255.255.255.0
+Router(config-if)#no shutdown
+Router(config-if)#
+Mar 31 04:58:20.977: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
+Mar 31 04:58:21.979: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
+Router(config-if)#exit
+Router(config)#interface serial 0/0
+Router(config-if)#ip address 10.1.1.2 255.255.255.0
+Router(config-if)#clock rate 64000
+Router(config-if)#no shutdown
+Router(config-if)#exit
+Router(config)#interface serial 0/1
+Router(config-if)#clock rate 64000
+Router(config-if)#ip address 10.1.4.1 255.255.255.0
+Router(config-if)#no shutdown
+Router(config-if)#exit
+Router(config)#
+Mar 31 05:02:14.752: %LINK-3-UPDOWN: Interface Serial0/1, changed state to up
+Mar 31 05:02:15.754: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1, changed state to up
+Router(config)#
+Mar 31 05:03:14.017: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up
+Mar 31 05:03:15.019: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
+Router(config)#router ospf 123
+Router(config-router)#network 10.1.1.0 0.0.0.255 area 0
+Router(config-router)#network 10.1.4.0 0.0.0.255 area 0
+Router(config-router)#network 10.1.5.0 0.0.0.255 area 0
+Router(config-router)#
+Mar 31 05:05:01.129: %OSPF-5-ADJCHG: Process 123, Nbr 10.1.6.1 on Serial0/1 from LOADING to FULL, Loading Done
+Router(config-router)#
+#włączenie uwierzytelniania prostego:
+Router(config)#router ospf 123
+Router(config-router)#area 0 authentication
+Router(config-router)#exit
+Router(config)#interface serial 0/0
+Router(config-if)#ip ospf authentication-key pwsz
+Router(config-if)#exit
+Router(config)#interface serial 0/1
+Router(config-if)#ip ospf authentication-key pwsz
+Router(config-if)#exit
+Router(config)#
+#włączenie uwierzytelniania MD5:
+Router(config)#router ospf 123
+Router(config-router)#area 0 authentication message-digest
+Router(config-router)#exit
+Router(config)#interface serial 0/0
+Router(config-if)#ip ospf message-digest-key 1 md5 pwsz
+Router(config-if)#exit
+Router(config)#interface serial 0/1
+Router(config-if)#ip ospf message-digest-key 1 md5 pwsz
+Router(config-if)#
+</file>

cisco-ospf.txt · ostatnio zmienione: 2018/07/16 11:47 przez 127.0.0.1