Narzędzia użytkownika

Narzędzia witryny


cisco-ospf

Różnice

Różnice między wybraną wersją a wersją aktualną.

Odnośnik do tego porównania

cisco-ospf [2018/07/16 11:47] (aktualna)
Linia 1: Linia 1:
 +===== CISCO - OSPF =====
  
 +<file>
 +Router#configure terminal
 +Router(config)#interface fa 0/0
 +Router(config-if)#ip address 10.1.5.1 255.255.255.0
 +Router(config-if)#no shutdown
 +Router(config-if)#
 +Mar 31 04:58:20.977: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
 +Mar 31 04:58:21.979: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
 +Router(config-if)#exit
 +Router(config)#interface serial 0/0
 +Router(config-if)#ip address 10.1.1.2 255.255.255.0
 +Router(config-if)#clock rate 64000
 +Router(config-if)#no shutdown
 +Router(config-if)#exit
 +Router(config)#interface serial 0/1
 +Router(config-if)#clock rate 64000
 +Router(config-if)#ip address 10.1.4.1 255.255.255.0
 +Router(config-if)#no shutdown
 +Router(config-if)#exit
 +Router(config)#
 +Mar 31 05:02:14.752: %LINK-3-UPDOWN: Interface Serial0/1, changed state to up
 +Mar 31 05:02:15.754: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1, changed state to up
 +Router(config)#
 +Mar 31 05:03:14.017: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up
 +Mar 31 05:03:15.019: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
 +Router(config)#router ospf 123
 +Router(config-router)#network 10.1.1.0 0.0.0.255 area 0
 +Router(config-router)#network 10.1.4.0 0.0.0.255 area 0
 +Router(config-router)#network 10.1.5.0 0.0.0.255 area 0
 +Router(config-router)#
 +Mar 31 05:05:01.129: %OSPF-5-ADJCHG: Process 123, Nbr 10.1.6.1 on Serial0/1 from LOADING to FULL, Loading Done
 +Router(config-router)#
 +
 +#włączenie uwierzytelniania prostego:
 +
 +Router(config)#router ospf 123
 +Router(config-router)#area 0 authentication
 +Router(config-router)#exit
 +Router(config)#interface serial 0/0
 +Router(config-if)#ip ospf authentication-key pwsz
 +Router(config-if)#exit
 +Router(config)#interface serial 0/1
 +Router(config-if)#ip ospf authentication-key pwsz
 +Router(config-if)#exit
 +Router(config)#
 +
 +#włączenie uwierzytelniania MD5:
 +
 +Router(config)#router ospf 123
 +Router(config-router)#area 0 authentication message-digest
 +Router(config-router)#exit
 +Router(config)#interface serial 0/0
 +Router(config-if)#ip ospf message-digest-key 1 md5 pwsz
 +Router(config-if)#exit
 +Router(config)#interface serial 0/1
 +Router(config-if)#ip ospf message-digest-key 1 md5 pwsz
 +Router(config-if)#
 +</file>
cisco-ospf.txt · ostatnio zmienione: 2018/07/16 11:47 (edycja zewnętrzna)